欢迎来到山东功夫标识有限金沙澳门投注app官网!

功夫标识Gongfu Sign
多年专注标牌标识行业标识标牌一站式服务商
全国咨询热线:13064098917
您的地位: ag贵宾厅首页>> 新闻中心 >> 金沙澳门投注app新闻

咨询热线

13064098917

ag贵宾厅首页报道山东标牌制作厂分享广告标牌制作工艺_ag贵宾厅首页官网资讯

作者:功夫标识时间:2019-10-12文章来源:www.atbkkek.cn 232次扫瞄

信息摘要:

山东标牌制作厂讲形态各异的广告标牌随处可见,但是大家对于广告标牌的制作工艺了解有多少呢?下面,我们一起学习一下吧!   1、烤漆工艺要求   1)清洗表面残留物,补灰,打磨等一系列表面处置.   2)采纳环保型优质油漆烤漆处置.烤漆房须无尘埃颗粒车间,烤漆表面涂层三涂三烤处置.   3) 油漆色彩要符合设计方案要求.

山东标牌制作厂讲形态各异的广告标牌随处可见,但是大家对于广告标牌的制作工艺了解有多少呢?下面,我们一起学习一下吧!

Shandong Signboard Manufacturing Factory says that different forms of billboards can be seen everywhere, but how much do you know about the production process of billboards? Next, let's learn together!

1、烤漆工艺要求

1. Process Requirements of Baking Paint

1)清洗表面残留物,补灰,打磨等一系列表面处置.

1) A series of surface treatments, such as cleaning surface residues, ash filling, grinding and so on.

2)采纳环保型优质油漆烤漆处置.烤漆房须无尘埃颗粒车间,烤漆表面涂层三涂三烤处置.

2) Use environmentally friendly high-quality paint baking process. The baking room should be dust-free particle workshop, three coatings and three baking treatments on the surface of the baking paint.

3) 油漆色彩要符合设计方案要求.

3) Paint color should meet the design requirements.

4) 面漆膜应平滑、均匀,不同意出现流痕、皱纹、桔皮、气泡、夹杂等影响装饰效果的缺陷.

4) the finish film shall be smooth and uniform, and no defects such as flow marks, wrinkles, orange peel, bubbles, inclusions, etc. that affect the decoration effect are allowed.

2、铝合金型材要求

2. Requirements for Aluminum Alloy Profiles

1)铝合金型材和常用塑胶原料配件应符合铝合金标牌型材的质量要求.

1) Aluminum alloy profiles and common plastic material accessories shall meet the quality requirements of aluminium alloy brand profiles.

2)铝合金型材的角底偏差少于正负偏差1度.

2) The angle-bottom deviation of aluminium alloy profile is less than 1 degree of positive and negative deviation.

3)平面间隙<=0.4%*B.

3) Planar clearance <=0.4%*B.

3、ag贵宾厅首页工艺要求

3. Stainless steel process requirements

1)ag贵宾厅首页板须刨坑折弯焊接.

1) Stainless steel sheets shall be welded by bending and shaving pits.

2)焊接前清除表面油污,减少焊缝形成的虚焊、气孔、裂纹等缺陷.

2) Clean up the oil stain on the surface before welding, and reduce the defects of virtual welding, pore and crack.

3)焊接完后将一切可见焊缝打磨光滑,与周围表面一样平滑,无显著划痕.

3) After welding, all visible welds are polished smooth, as smooth as the surrounding surface, without obvious scratches.

完工外观要求:安装完成后标牌外观精巧,表面无螺钉,无划痕、气泡及显著的颜色不均匀,烤漆须无显著色差,所用原料符合设计方案要求.

Finished Appearance Requirements: After installation, the label has exquisite appearance, no screw on the surface, no scratches, no bubbles and obvious uneven color, no obvious color difference in the paint, and the materials used meet the design requirements./

返回列表 本文标签:
网站地图